[lazarus] Run error FIXED!!!

[Luis R. Hilario]

I have the same problem and I cannot solve it. I surrender. :-)

Shane Miller wrote:
> 
> Yes, there still seems to be SOME problem with how everything is being
> compiled.
> 
> When I encounter this I do this:
> 
> make clean
> make lazarus
> ./lazarus
> 
> If it crashes I do this:
> 
> make clean
> go into designer, lcl, lcl/interfaces/gtk and delete all the *.o and *.ppu
> files
> make lazarus
> ./lazarus
> if it crashes I try this
> 
> make clean
> touch lcl/controls.pp
> make lazarus
> 
> if it crashes I do this
> OPen uniteditor.pp.  Change something, then change it back.  Save it.  OPen
> customformeditor.pp.  Change something, then change it back.
> make lazarus
> 
> If it crashes I start with the swearing (ok, I started that a while back)
> and I punt.  I have setup my ppc386.cfg file to work and so I can do this:
> 
> ppc386 -B lazarus.pp
> Sometimes that will work.
> 
> I don't know what the problem is.  It doesn't seem to be in the code because
> it's not consistent.
> 
> Shane
> 
> -----Original Message-----
> From: Andy Clay <andyc at t130.aone.net.au>
> To: lazarus at miraclec.com <lazarus at miraclec.com>
> Date: Monday, January 15, 2001 6:54 PM
> Subject: Re: [lazarus] Run error FIXED!!!
> 
> >I just did a cvs update lazarus, make clean, make - and it still errors
> >on running. I am using 1.0.5 compiler.
> >
> >response to run is -
> >
> >LM_SCREENINIT called --> should go to GTKObject.Init
> >TODO: check this
> >[TCustomForm.Create] Resource 'TSPLASHFORM' not found
> >This is for information purposes only.   This is not critical at this
> >time.
> >[TCustomForm.Create] Resource 'TMAINIDE' not found
> >This is for information purposes only.   This is not critical at this
> >time.
> >An unhandled exception occurred at 0x080E00FF :
> >Access violation
> >  0x080E00FF
> >  0xBFFFF5F0
> >  0x080E0F6E
> >  0xBFFFF618
> >An unhandled exception occurred at 0x080DCDBA :
> >Access violation
> >  0x080DCDBA
> >  0x3020200C
> >  0x00000000
> >
> >An unhandled exception occurred at 0x00000020 :
> >Access violation
> >  0x00000020
> >  0x080B0FFC
> >  0x080E1BCF
> >  0x080B12BF
> >  0x080D3C8B
> >  0x080D3C37
> >  0x080B8955
> >  0xBFFFF70C
> >An unhandled exception occurred at 0x080DCDBA :
> >Access violation
> >  0x080DCDBA
> >  0x3020200C
> >  0x00000000
> >
> >[TgtkObject.Destroy] WARNING: There are 24 unreleased DCs and 127
> >unreleased GDIObjects
> >[TgtkObject.Destroy] WARNING: There are 4 messages left in the queue!
> >I'll free them
> >An unhandled exception occurred at 0x080E00C8 :
> >Access violation
> >  0x080E00C8
> >  0x00000001
> >  0x081360DC
> >
> >
> >Cheers... Andy
> >
> >Shane Miller wrote:
> >>
> >> OK, I found the error.  It was actually an error in Main.pp but the
> exception was thrown in the resources file.
> >>
> >> Either way, it's fixed.  Please pull from CVS to get the latest verison
> of Lazarus.
> >>
> >> Please email the list that I am correct that this error is fixed now.
> >>
> >> Thanks
> >> Shane
> >>
> >> >>> SMiller1 at stvgb.org 01/15/01 12:20PM >>>
> >> The problem with the latest LAZARUS code is again in the resources unit.
> When it doesn't find the TToolbutton resource it goes to load DEFAULT.  When
> it does find it, it crashes on the line
> >>
> >> Result := LResource(FList[p]^);
> >> wher p = 20.  I'm not sure what the problem is yet with this line though.
> >>
> >> Shane
> >>
> >> >>> SMiller1 at stvgb.org 01/15/01 10:40AM >>>
> >> OK, I have looked at this problem and I'm not sure what's cauing it but
> on this PC I can't run it either.
> >>
> >> I am still looking into it.
> >>
> >> Shane
> >>
> >> >>> marcov at Stack.nl 01/15/01 09:19AM >>>
> >> > Two things:  Make sure you have pulled the latest version of LAzarus
> from CVS.  Also, make sure you are using
> >> >
> >> > make clean
> >> > make lazarus
> >> >
> >> > the first time you do this and be sure you have FPC version 1.0.5
> >>
> >> My problems seem to be a lot like his, and I tried to k (s- under
> linux)trace
> >> the problem points.
> >>
> >> Seems that failed read's (resource not ready or busy) from descriptors
> >> created by a socket call are the problem.
> >>
> >> I also have a feeling the problems are within the linked in libraries.
> (by
> >> examining the traceback from -gl), what GTK version is now recommended?

-- 
 |-----------------------------|
| Luis R. Hilario               |
| http://www.luisdigital.2y.net |
 |-----------------------------|