[lazarus] Run error FIXED!!!

[Andy Clay]

Nope - same crashes

Cheers... Andy

Shane Miller wrote:
> 
> Hey try this:
> 
> Update from CVS
> 
> type this when in the lazarus dir.
> 
> make clean; make OPT=-dDEBUG
> 
> ./lazarus
> 
> That seems to work for me.
> 
> Shane
> 
> >>> luis at luis-digital.8m.com 01/16/01 10:18AM >>>
> I have the same problem and I cannot solve it. I surrender. :-)
> 
> Shane Miller wrote:
> >
> > Yes, there still seems to be SOME problem with how everything is being
> > compiled.
> >
> > When I encounter this I do this:
> >
> > make clean
> > make lazarus
> > ./lazarus
> >
> > If it crashes I do this:
> >
> > make clean
> > go into designer, lcl, lcl/interfaces/gtk and delete all the *.o and *.ppu
> > files
> > make lazarus
> > ./lazarus
> > if it crashes I try this
> >
> > make clean
> > touch lcl/controls.pp
> > make lazarus
> >
> > if it crashes I do this
> > OPen uniteditor.pp.  Change something, then change it back.  Save it.  OPen
> > customformeditor.pp.  Change something, then change it back.
> > make lazarus
> >
> > If it crashes I start with the swearing (ok, I started that a while back)
> > and I punt.  I have setup my ppc386.cfg file to work and so I can do this:
> >
> > ppc386 -B lazarus.pp
> > Sometimes that will work.
> >
> > I don't know what the problem is.  It doesn't seem to be in the code because
> > it's not consistent.
> >
> > Shane
> >
> > -----Original Message-----
> > From: Andy Clay <andyc at t130.aone.net.au>
> > To: lazarus at miraclec.com <lazarus at miraclec.com>
> > Date: Monday, January 15, 2001 6:54 PM
> > Subject: Re: [lazarus] Run error FIXED!!!
> >
> > >I just did a cvs update lazarus, make clean, make - and it still errors
> > >on running. I am using 1.0.5 compiler.
> > >
> > >response to run is -
> > >
> > >LM_SCREENINIT called --> should go to GTKObject.Init
> > >TODO: check this
> > >[TCustomForm.Create] Resource 'TSPLASHFORM' not found
> > >This is for information purposes only.   This is not critical at this
> > >time.
> > >[TCustomForm.Create] Resource 'TMAINIDE' not found
> > >This is for information purposes only.   This is not critical at this
> > >time.
> > >An unhandled exception occurred at 0x080E00FF :
> > >Access violation
> > >  0x080E00FF
> > >  0xBFFFF5F0
> > >  0x080E0F6E
> > >  0xBFFFF618
> > >An unhandled exception occurred at 0x080DCDBA :
> > >Access violation
> > >  0x080DCDBA
> > >  0x3020200C
> > >  0x00000000
> > >
> > >An unhandled exception occurred at 0x00000020 :
> > >Access violation
> > >  0x00000020
> > >  0x080B0FFC
> > >  0x080E1BCF
> > >  0x080B12BF
> > >  0x080D3C8B
> > >  0x080D3C37
> > >  0x080B8955
> > >  0xBFFFF70C
> > >An unhandled exception occurred at 0x080DCDBA :
> > >Access violation
> > >  0x080DCDBA
> > >  0x3020200C
> > >  0x00000000
> > >
> > >[TgtkObject.Destroy] WARNING: There are 24 unreleased DCs and 127
> > >unreleased GDIObjects
> > >[TgtkObject.Destroy] WARNING: There are 4 messages left in the queue!
> > >I'll free them
> > >An unhandled exception occurred at 0x080E00C8 :
> > >Access violation
> > >  0x080E00C8
> > >  0x00000001
> > >  0x081360DC
> > >
> > >
> > >Cheers... Andy
> > >
> > >Shane Miller wrote:
> > >>
> > >> OK, I found the error.  It was actually an error in Main.pp but the
> > exception was thrown in the resources file.
> > >>
> > >> Either way, it's fixed.  Please pull from CVS to get the latest verison
> > of Lazarus.
> > >>
> > >> Please email the list that I am correct that this error is fixed now.
> > >>
> > >> Thanks
> > >> Shane
> > >>
> > >> >>> SMiller1 at stvgb.org 01/15/01 12:20PM >>>
> > >> The problem with the latest LAZARUS code is again in the resources unit.
> > When it doesn't find the TToolbutton resource it goes to load DEFAULT.  When
> > it does find it, it crashes on the line
> > >>
> > >> Result := LResource(FList[p]^);
> > >> wher p = 20.  I'm not sure what the problem is yet with this line though.
> > >>
> > >> Shane
> > >>
> > >> >>> SMiller1 at stvgb.org 01/15/01 10:40AM >>>
> > >> OK, I have looked at this problem and I'm not sure what's cauing it but
> > on this PC I can't run it either.
> > >>
> > >> I am still looking into it.
> > >>
> > >> Shane
> > >>
> > >> >>> marcov at Stack.nl 01/15/01 09:19AM >>>
> > >> > Two things:  Make sure you have pulled the latest version of LAzarus
> > from CVS.  Also, make sure you are using
> > >> >
> > >> > make clean
> > >> > make lazarus
> > >> >
> > >> > the first time you do this and be sure you have FPC version 1.0.5
> > >>
> > >> My problems seem to be a lot like his, and I tried to k (s- under
> > linux)trace
> > >> the problem points.
> > >>
> > >> Seems that failed read's (resource not ready or busy) from descriptors
> > >> created by a socket call are the problem.
> > >>
> > >> I also have a feeling the problems are within the linked in libraries.
> > (by
> > >> examining the traceback from -gl), what GTK version is now recommended?
> 
> --
>  |-----------------------------|
> | Luis R. Hilario               |
> | http://www.luisdigital.2y.net |
>  |-----------------------------|
> 
> _________________________________________________________________
>      To unsubscribe: mail lazarus-request at miraclec.com with
>                 "unsubscribe" as the Subject
>     archives at http://www.miraclec.com/list_archives/lazarus
> 
> _________________________________________________________________
>      To unsubscribe: mail lazarus-request at miraclec.com with
>                 "unsubscribe" as the Subject
>     archives at http://www.miraclec.com/list_archives/lazarus