[Lazarus] Lazarus SVN build "stucked" to TFPCSourceCache.Update after ran

[Mattias Gaertner]

On Wed, 29 Sep 2010 00:03:39 +0200
Thierry Bothorel <thierry.bothorel at gmail.com> wrote:

> Mattias Gaertner a écrit :
> > On Tue, 28 Sep 2010 22:44:06 +0200
> > Thierry Bothorel <thierry.bothorel at gmail.com> wrote:
> >
> >   
> >> [...]
> >> Ok, so this brings me to the starting point :-) I did a test. If I run just
> >> startlazarus --pcp=~/.lazarus
> >> it starts properly ,because it reads
> >> /etc/lazarus/environmentoptions.xml, but this file is not supposed to be
> >> there because it is installed and setup for another Lazarus installation.
> >>
> >> But if /etc/lazarus/environmentoptions.xml does not exist (as if I has
> >> not installed Lazarus from  Ubuntu repositories) , I get back to the
> >> TFPCSourceCache.Update problem. On a fresh install no primary or
> >> secondary config file is supposed to be there. I compiled Lazarus
> >> with-dVerboseFPCSrcScan but I did not noticed new lines in the output.
> >>     
> >
> > Then start the IDE in gdb, run it, stop it and see the backtrace.
> >
> > Mattias
> >
> > --
> >   
> Uhm I never used gdb this way. Is this what you mean (see the last lines)
> 
> ~$ gdb --args
> /home/thierrybo/Sys/local/opt/lazarus_FPC_svn/startlazarus 
> --pcp=~/.lazarus --scp=~/.lazarus
> GNU gdb (GDB) 7.0-ubuntu
> Copyright (C) 2009 Free Software Foundation, Inc.
> License GPLv3+: GNU GPL version 3 or later
> <http://gnu.org/licenses/gpl.html>
> This is free software: you are free to change and redistribute it.
> There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
> and "show warranty" for details.
> This GDB was configured as "x86_64-linux-gnu".
> For bug reporting instructions, please see:
> <http://www.gnu.org/software/gdb/bugs/>...
> Reading symbols from
> /home/thierrybo/Sys/local/opt/lazarus_FPC_svn/startlazarus...done.
> (gdb)
> (gdb) r
> Starting program:
> /home/thierrybo/Sys/local/opt/lazarus_FPC_svn/startlazarus
> --pcp=\~/.lazarus --scp=\~/.lazarus
> [Thread debugging using libthread_db enabled]
> Adding "--pcp=~/.lazarus" as a parameter
> Adding "--scp=~/.lazarus" as a parameter
> TLazarusManager.Run starting
> /home/thierrybo/Sys/local/opt/lazarus_FPC_svn/lazarus ...
> SetPrimaryConfigPath NewValue="~/.lazarus" -> "/home/thierrybo/.lazarus"
> SetSecondaryConfigPath NewValue="~/.lazarus" -> "/home/thierrybo/.lazarus"
> TMainIDE.ParseCmdLineOptions:
>   PrimaryConfigPath="/home/thierrybo/.lazarus"
>   SecondaryConfigPath="/home/thierrybo/.lazarus"
> Note: environment config file not found - using defaults
> NOTE: editor options config file not found - using defaults
> NOTE: miscellaneous options file not found - using defaults
> NOTE : fichier de configuration codetools non trouvé. Valeurs par défaut
> utilisées.
> 
> NOTE: Compiler filename not set! (see Environment / Options ... /
> Environment / Files)
> 
> NOTE: FPC source directory not set! (see Environment / Options ... /
> Environment / Files)
> TFPCTargetConfigCache.NeedsUpdate compiler file changed "/usr/bin/fpc"
> FileAge=1244031136 StoredAge=0
> TFPCTargetConfigCache.Update /usr/bin/fpc TargetOS=linux
> TargetCPU=x86_64 CompilerOptions= ExtraOptions=
> RunTool /usr/bin/fpc -iTOTP -Px86_64 -Tlinux
> RunTool /usr/bin/fpc -va -Px86_64 -Tlinux compilertest.pas
> Using unit path: "/usr/lib/fpc/2.2.4/units/x86_64-linux/rtl"
>[...]
> Using unit path: "/usr/lib/fpc/2.2.4/units/x86_64-linux"
> Using unit path: "/usr/lib/fpc/2.2.4/units/x86_64-linux/httpd22"
> Using unit path: "/usr/lib/fpc/2.2.4"
> TFPCTargetConfigCache.Update: has changed
> TMainIDE.RescanCompilerDefines A  ClearCaches=False
> CompilerFilename=/usr/bin/fpc TargetOS=linux TargetCPU=x86_64

Looks good.


> EnvFPCSrcDir=/usr/share/fpcsrc/$(FPCVer)/ FPCSrcDir=

This can be improved. But I use a fpc source path with this macro too,
so this can not be the bug.


> TFPCSourceCache.Update /home/thierrybo ...
> ^C
> Program received signal SIGINT, Interrupt.
> 0x000000000053ff41 in
> SYSTEM_FPSYSCALL$INT64$INT64$INT64$INT64$INT64$$INT64 ()
> (gdb) bt
> #0  0x000000000053ff41 in
> SYSTEM_FPSYSCALL$INT64$INT64$INT64$INT64$INT64$$INT64
>     ()
> #1  0x0000000000540520 in SYSTEM_FPWAITPID$LONGINT$PCINT$LONGINT$$LONGINT ()
> #2  0x0000000000000000 in ?? ()
> (gdb)

Strange.


Mattias