[lazarus] Run error FIXED!!!
Andy Clay
andyc at t130.aone.net.au
Wed Jan 17 17:12:26 EST 2001
Shane my apologies. It was a glitch with some leftover files from a
previous version of lazarus that I tried some time ago, but had not
fully uninstalled. New version now runs, so I can check it out now.
Sorry Andy.
Shane Miller wrote:
>
> Have you ever used ppc386 lazarus.pp to compile? If so, make sure all the .ppu and .o files are deleted from the subdirectories prior to using make.
>
> See if there are and .o or .ppu files in your subdirectories and remove them.
>
> Are you using 1.0.5 from the FIXES_1_0_0 branch in FPC?
>
> Shane
>
> >>> andyc at t130.aone.net.au 01/16/01 10:23PM >>>
>
> Nope - same crashes
>
> Cheers... Andy
>
> Shane Miller wrote:
> >
> > Hey try this:
> >
> > Update from CVS
> >
> > type this when in the lazarus dir.
> >
> > make clean; make OPT=-dDEBUG
> >
> > ./lazarus
> >
> > That seems to work for me.
> >
> > Shane
> >
> > >>> luis at luis-digital.8m.com 01/16/01 10:18AM >>>
> > I have the same problem and I cannot solve it. I surrender. :-)
> >
> > Shane Miller wrote:
> > >
> > > Yes, there still seems to be SOME problem with how everything is being
> > > compiled.
> > >
> > > When I encounter this I do this:
> > >
> > > make clean
> > > make lazarus
> > > ./lazarus
> > >
> > > If it crashes I do this:
> > >
> > > make clean
> > > go into designer, lcl, lcl/interfaces/gtk and delete all the *.o and *.ppu
> > > files
> > > make lazarus
> > > ./lazarus
> > > if it crashes I try this
> > >
> > > make clean
> > > touch lcl/controls.pp
> > > make lazarus
> > >
> > > if it crashes I do this
> > > OPen uniteditor.pp. Change something, then change it back. Save it. OPen
> > > customformeditor.pp. Change something, then change it back.
> > > make lazarus
> > >
> > > If it crashes I start with the swearing (ok, I started that a while back)
> > > and I punt. I have setup my ppc386.cfg file to work and so I can do this:
> > >
> > > ppc386 -B lazarus.pp
> > > Sometimes that will work.
> > >
> > > I don't know what the problem is. It doesn't seem to be in the code because
> > > it's not consistent.
> > >
> > > Shane
> > >
> > > -----Original Message-----
> > > From: Andy Clay <andyc at t130.aone.net.au>
> > > To: lazarus at miraclec.com <lazarus at miraclec.com>
> > > Date: Monday, January 15, 2001 6:54 PM
> > > Subject: Re: [lazarus] Run error FIXED!!!
> > >
> > > >I just did a cvs update lazarus, make clean, make - and it still errors
> > > >on running. I am using 1.0.5 compiler.
> > > >
> > > >response to run is -
> > > >
> > > >LM_SCREENINIT called --> should go to GTKObject.Init
> > > >TODO: check this
> > > >[TCustomForm.Create] Resource 'TSPLASHFORM' not found
> > > >This is for information purposes only. This is not critical at this
> > > >time.
> > > >[TCustomForm.Create] Resource 'TMAINIDE' not found
> > > >This is for information purposes only. This is not critical at this
> > > >time.
> > > >An unhandled exception occurred at 0x080E00FF :
> > > >Access violation
> > > > 0x080E00FF
> > > > 0xBFFFF5F0
> > > > 0x080E0F6E
> > > > 0xBFFFF618
> > > >An unhandled exception occurred at 0x080DCDBA :
> > > >Access violation
> > > > 0x080DCDBA
> > > > 0x3020200C
> > > > 0x00000000
> > > >
> > > >An unhandled exception occurred at 0x00000020 :
> > > >Access violation
> > > > 0x00000020
> > > > 0x080B0FFC
> > > > 0x080E1BCF
> > > > 0x080B12BF
> > > > 0x080D3C8B
> > > > 0x080D3C37
> > > > 0x080B8955
> > > > 0xBFFFF70C
> > > >An unhandled exception occurred at 0x080DCDBA :
> > > >Access violation
> > > > 0x080DCDBA
> > > > 0x3020200C
> > > > 0x00000000
> > > >
> > > >[TgtkObject.Destroy] WARNING: There are 24 unreleased DCs and 127
> > > >unreleased GDIObjects
> > > >[TgtkObject.Destroy] WARNING: There are 4 messages left in the queue!
> > > >I'll free them
> > > >An unhandled exception occurred at 0x080E00C8 :
> > > >Access violation
> > > > 0x080E00C8
> > > > 0x00000001
> > > > 0x081360DC
> > > >
> > > >
> > > >Cheers... Andy
> > > >
> > > >Shane Miller wrote:
> > > >>
> > > >> OK, I found the error. It was actually an error in Main.pp but the
> > > exception was thrown in the resources file.
> > > >>
> > > >> Either way, it's fixed. Please pull from CVS to get the latest verison
> > > of Lazarus.
> > > >>
> > > >> Please email the list that I am correct that this error is fixed now.
> > > >>
> > > >> Thanks
> > > >> Shane
> > > >>
> > > >> >>> SMiller1 at stvgb.org 01/15/01 12:20PM >>>
> > > >> The problem with the latest LAZARUS code is again in the resources unit.
> > > When it doesn't find the TToolbutton resource it goes to load DEFAULT. When
> > > it does find it, it crashes on the line
> > > >>
> > > >> Result := LResource(FList[p]^);
> > > >> wher p = 20. I'm not sure what the problem is yet with this line though.
> > > >>
> > > >> Shane
> > > >>
> > > >> >>> SMiller1 at stvgb.org 01/15/01 10:40AM >>>
> > > >> OK, I have looked at this problem and I'm not sure what's cauing it but
> > > on this PC I can't run it either.
> > > >>
> > > >> I am still looking into it.
> > > >>
> > > >> Shane
> > > >>
> > > >> >>> marcov at Stack.nl 01/15/01 09:19AM >>>
> > > >> > Two things: Make sure you have pulled the latest version of LAzarus
> > > from CVS. Also, make sure you are using
> > > >> >
> > > >> > make clean
> > > >> > make lazarus
> > > >> >
> > > >> > the first time you do this and be sure you have FPC version 1.0.5
> > > >>
> > > >> My problems seem to be a lot like his, and I tried to k (s- under
> > > linux)trace
> > > >> the problem points.
> > > >>
> > > >> Seems that failed read's (resource not ready or busy) from descriptors
> > > >> created by a socket call are the problem.
> > > >>
> > > >> I also have a feeling the problems are within the linked in libraries.
> > > (by
> > > >> examining the traceback from -gl), what GTK version is now recommended?
> >
> > --
> > |-----------------------------|
> > | Luis R. Hilario |
> > | http://www.luisdigital.2y.net |
> > |-----------------------------|
> >
> > _________________________________________________________________
> > To unsubscribe: mail lazarus-request at miraclec.com with
> > "unsubscribe" as the Subject
> > archives at http://www.miraclec.com/list_archives/lazarus
> >
> > _________________________________________________________________
> > To unsubscribe: mail lazarus-request at miraclec.com with
> > "unsubscribe" as the Subject
> > archives at http://www.miraclec.com/list_archives/lazarus
>
> _________________________________________________________________
> To unsubscribe: mail lazarus-request at miraclec.com with
> "unsubscribe" as the Subject
> archives at http://www.miraclec.com/list_archives/lazarus
>
> _________________________________________________________________
> To unsubscribe: mail lazarus-request at miraclec.com with
> "unsubscribe" as the Subject
> archives at http://www.miraclec.com/list_archives/lazarus
More information about the Lazarus
mailing list