[Lazarus] Lazarus 1.8 RC1 under Raspbian Jessie

[Joe]

Am 30.05.2017 um 00:36 schrieb Bo Berglund via Lazarus:
> On Sat, 27 May 2017 11:20:17 +0200, Joe via Lazarus
> <lazarus at lists.lazarus-ide.org> wrote:
>
>> Am 26.05.2017 um 13:02 schrieb Bo Berglund via Lazarus:
>>> You could try my script for installation of FPC + Lazarus on an RPi3.
>>> http://blog.boberglund.com/install_lazfpc_local_pi.sh
>>>
>>> In order to get the version you need just edit the script before
>>> running it and replace the versions at the top of the file with the
>>> one you want.
>> Bo,
>> unfortunately, this failed with error message something could not be
>> found. Seems, I did not edit the script the right way.
>> What lines are to be edited and exactly how for Lazarus 1.8.0 RC1?
>> Thanx -- Joe
> Hi again!
> I have now returned home and been able to check the script.
> I used a brand new Jessie PIXEL image and did this before starting the
> script:
> - Created dir /home/pi/bin where the fpc binary will reside
> - Logged off and back on again to put this dir into the PATH
>
> Turns out that the fpc sourceinstall command on line #150 fails
> because there is no current path to the seed compiler ppcarm....
> So I have added option FPC=<path to ppcarm> on that line and with that
> done the script runs OK to the end and Lazarus is available on the
> main Jessie menu below "Programming".
>
> The corrected script is found here:
> http://blog.boberglund.com/install_lazfpc_local_pi.sh
>
> Regarding configuration, these lines need to be handled by editing the
> versions mainly (lines #32 and #43-46):
>
> LAZDESK=/home/pi/.local/share/applications/lazarus_1.6.2.desktop
> FPCTAG=release_3_0_0
> FPCVER=3.0.0
> LAZTAG=lazarus_1_6_2
> LAZVER=1.6.2
>
> In your case change them to this:
>
> LAZDESK=/home/pi/.local/share/applications/lazarus_1.8.RC1.desktop
> FPCTAG=release_3_0_2
> FPCVER=3.0.2
> LAZTAG=lazarus_1_8_0_RC1
> LAZVER=1.8.RC1
>
> HTH
>
>
.
.
Bo, helps a lot. Very kind. Have a nice day.
Cordialmente --  Joe