[Lazarus] Raspbian FPC 3.3.1 and Lazarus 2.0 Available

[Milan Baša]

OK. Thank You. I will buy larger SD. This one is what I have at home.
Tomorrow I will try new card.
Thank you for the effort.

Dňa 21. 3. 2019 o 10:30 Bo Berglund via lazarus napísal(a):
> On Thu, 21 Mar 2019 09:12:14 +0100, Milan Baša via lazarus
> <lazarus at lists.lazarus-ide.org> wrote:
> 
>> I have 2 GB free space with Lazarus installed.
>> I think it was not swap problem.
> 
> On my Rpi3 with Stretch I have the following sizes:
> ~/dev/fpc/3.0.4 =581 M
> ~/dev/fpc/laz/2.0.0 = 959 M
> ~/share/src/fpc-3.0.4 = 287 M
> Just these are a total of 1827 M
> 
> I build both from sources via svn in my user home dir.
> 
> My experience is that when the fpc or lazarus build process stop with
> strange errors then swap size is the culprit.
> I always use 1 GB swap. But that of course needs an additional 1 GB of
> disk space so with an 8GB SD-card you need 2.83 GB for fpc/laz and are
> left with about 5 GB for operating system and everything else....
> 
> I still say you should go for a larger SD card and set swap higher.
> 
> You could check how much you have used in a dir tree:
> 
> du -sh <target dir>
> Ex:
> $ du -sh ~/dev/fpc/3.0.4
> 581M    /home/pi/dev/fpc/3.0.4
> 
> 
> Or for total summary of the free space on the disk:
> 
> $ sudo du -sh /
> 17G     /
> 
> 
>